Full spec-sheet of the Mahindra Mojo 300 ABS leaked ahead of launch

18/07/2019 - 17:35 | ,   | Suvil Susvirkar

The complete specifications of the Mahindra Mojo ABS have leaked ahead of the impending launch. Regular readers would know that the bike has already started reaching the dealership.

Mahindra Mojo 300 Abs Full Specifications Feature
Leaked specifications reveal details like power output numbers, dimensions and dual-channel ABS of the Mahindra Mojo 300 ABS.

Also Read: Mahindra Mojo-based Peugeot P2x Roadster & P2x Cafe Racer

While we had revealed leaked the peak power-output figure earlier this month, the image seen here reveals the maximum torque number. The 294.72 cc fuel-injected, DOHC, liquid-cooled engine on the Mojo 300 ABS will deliver 19.34 kW (26.30 PS) of power at 7,500 rpm and 28 Nm of torque at 5,500 rpm. Check out the engine specification comparison between the new model and the old model in the table below:

Model Mojo 300 ABS Mojo XT300 Mojo UT300
Engine 294.72 cc, DOHC, single-cylinder, liquid-cooled engine with fuel injection 295 cc, DOHC, single-cylinder, liquid-cooled engine with fuel injection 294.72 cc, DOHC, single-cylinder, liquid-cooled engine with a carburettor
Maximum Power @ rpm 19.34 kW (26.30 PS) at 7,500 rpm 20 kW (27.19 PS) at 8,000 rpm 17 kW (23.11 PS) at 7,500 rpm
Peak Torque @ rpm 28 Nm at 5,500 rpm 30 Nm at 5,500 rpm 25.5 Nm at 5,500 rpm
Transmission Six-speed Six-speed Six-speed

The peak power and maximum torque output of the sits between that of the discontinued model's XT300 and the UT300 variants. In terms of dimensions, the Mojo 300 ABS matches the UT300 variant. Check out the complete dimension comparison in the table below:

Model Mojo 300 ABS Mojo XT300 Mojo UT300
Wheelbase 1,460 mm 1,465 mm 1,460 mm
Ground Clearance 165 mm 173.5 mm 165 mm
Length 2,115 mm 2,100 mm 2,115 mm
Width 800 mm 800 mm 800 mm
Height 1,150 mm 1,165 mm 1,150 mm
Seat Height 815 mm 814.5 mm 818 mm
Fuel Tank Capacity 21-litres 21-litres 21-litres

The tyre profile of the Mojo 300 ABS, too, matches the UT300: 110/70-17 front and 140/70-17 rear. While the UT300 used MRF sourced tyres, the Mojo 300 ABS was seen with Pirelli sourced rubber at a showroom previously. Mahindra may offer MRF tyre equipped bikes at a relatively lower price and the Pirelli shod motorcycles at a premium.

The shock absorption setup on the upcoming Mojo 300 ABS will comprise conventional telescopic front forks and gas-charged monoshock at the back. The braking department will comprise the same disc sizes that were seen on the XT300 and UT300 models. The stopping power will come from 320 mm single disc with a fixed radial calliper at the front and 240 mm single disc with an axial floating calliper. The safety-net, as confirmed in the leaked spec sheet, will comprise dual-channel ABS.

Mahindra Mojo 300 Abs Leaked Specifications Full
The leaked spec-sheet also confirms that most of the dimensions of the Mojo 300 ABS match those of the Mojo UT300.

Also Read: Check out the official accessories and merchandise for Jawa motorcycles

The motorcycle will reportedly arrive at INR 1.88 lakh (ex-showroom Bangalore) price tag, which is approximately INR 4,000 more than the XT300 variant (without ABS). The launch details are still under wraps but we expect to hear an announcement very soon.

[Source: BikeAdvice.com]

You might also like