Royal Enfield Classic 350 Bobber by Jedi Customs

16/04/2017 - 15:56 | ,   | Neelanjan Chakraborty

The Royal Enfield Classic enjoys a cult following thanks to its retro looks.

A Royal Enfield 350 has been modified by Mumbai-based customiser called Jedi Customs. The bike gets a minimalist design and emerges as a clean Bobber.

Royal Enfield Classic 350 Bobber by Jedi Customs side view
The Royal Enfield Classic 350 Bobber gets a custom exhaust and peanut tank.

The peanut tank in the Royal Enfield Classic 350 Bobber gets a hand butted centre rib which adds sophistication to the bike. The leather seat has been hand stitched while the headlamp grille adds to the retro touch. The black spoked wheels also add to the charm.

Also Read: Royal Enfield Bullet 350 ‘Moltar Scrambler’ by Thrive Motorcycle

The Royal Enfield Classic 350 is powered by a 346 cc mill which is air cooled and gets the fuel-air mixture via a carburettor. Mated to a 5-speed transmission, the engine is capable of producing 19.8 bhp of power at 5,250 rpm. The torque figure though is a respectable 28 Nm at 4,000 rpm.

Also Read: Royal Enfield Electra 350 ‘Jasper’ by Eimor Customs

The stock bike is suspended over 35 mm right side up telescopic forks up front and twin gas charged shock absorbers in the rear with 5-step preload adjustability. Brakes include a 280 mm disc up front and a 153 mm drum setup in the rear.

Royal Enfield Classic 350 Bobber Jedi Customs front

Colour options for the factory Royal Enfield Classic 350 includes Ash, Chestnut, Lagoon, Silver, Black, Redditch Red, Redditch Green and Redditch Blue.

You might also like